SCHÜTTE Shower Panel SANSIBAR Stainless Steel Colour

Safety notes . Only allow experts carry out the installation work. . CAUTION DAMAGE BY WATER! Prior to installation please turn the general water supply off.Installation Instructions . Check all connections carefully after first-time use to make sure that they are tight. . We do not assume any warranty for incorrect installation - in particular for subsequent damages! . Ensure that all gaskets have the correct fit. . These shower panels are not suitable for use on low pres- sure and small electrical storage heaters. . We recommend the installation of a filter into the applian- ce or at least the use of angle valves with filter, in order to avoid the inflow of foreign matter, which could damage the cartridge. . This shower panel is only intended for use in private hou- seholds! Only suitable for use in rooms with a temperature over 0 C, when there is danger of frost, sut off the water supply and empty the shower panel. . Take care when adjusting the warm water. Danger of scalding! . Incorrectly installed fittings can cause water damages! . Please ensure that no caustic or corrosive products such as detergents or household cleaning products make contact with the connection hoses; this can lead to water damages. . Despite careful production, sharp edges can occur, Please exercise caution! . DANGER OF LOSS OF LIFE AND ACCIDENT TO INFANTS AND CHILDREN! Never leave children unsupervised with the packaging materials. Danger of suffocation. . CAUTION! DANGER OF INJURY! Please ensure that no parts are damaged and that all parts are correctly assem- bled. Incorrect assembly or fitting may lead to injury. . Damaged parts can adversely affect safety and proper function. . CAUTION DANGER OF WATER DAMAGE! Before installa- tion please ensure that there are no water pipes where you are intending to drill. . Examine the wall before installation and choose suitable installation fixings. We have supplied fixings suitable for an ordinary solid masonry wall. . Please note that seals are wear parts and therefore will require to be replaced from time to time. . WARNING - RISK OF ELECTROCUTION! Make sure that there are no electrical power lines where you are drilling before starting to drill holes.